中文版-
Installation process of connector OT terminal UT terminal2013.08.20
The connection and assembly relationship between each screw, nut, spring washer, and flat washer should refer to the assembly guide book or assembly drawing. If the guide book does not clearly indicate it, the principle of ensuring the maximum contact plane and taking appropria…
5015 -
2013.08.163716Control Cabinet Cable Layout Rules
The signal line The cable direction should be horizontal and vertical, and the cold pressing head (also known as the pin) must be pressed on both ends; When turning the cable, avoid dead bending and it is best to be smooth. This avoids damage to …
