中文版-
How do cold pressed terminals usually match wires2013.12.13
The matching wires for cold pressed terminals are generally divided into the following types: Crimping, also known as cold pressed terminals. Directly use tools or terminal machines and other equipment to crimp the wiring terminals onto the corresponding wires. Generally,…
10678 -
2013.11.1210436Cold pressing terminal wiring problem, how to operate
There are two types of cold pressed wiring terminals: copper and aluminum, open and closed. Cold pressed wiring terminals can be crimped using ordinary tools, without the need for spot welding and other processing. In fact, it is the wiring lug in the wire t…
-
2013.11.045363Cold pressed terminal to terminal quality inspection
The inspection of industrial products such as cold pressed terminals is highly valued For now. There is no direct method for detecting cold pressed terminals. However, indirect detection purposes can be achieved through remote control, such as controll…
-
2013.10.304981Voltage drop and cross-sectional inspection of various cold pressed terminals during detachment
There is a device called terminal section analyzer that specifically checks various types of cold pressed terminals to see if terminal crimping is qualified. The main purpose of hexagonal terminals is to conduct cross-sectional analysis and check for a…
-
2013.09.255136Color, model, and application range of needle type (type) cold pressed terminals
Tubular pre insulated terminals are also referred to as tubular pre insulated terminals or needle type cold pressed terminals in the industry, and belong to one of the specifications of cold pressed terminals When the tube type insulation terminal (nee…
-
2013.09.173940Cold pressed terminals can be used for connecting electrical control cabinet modules with wires
The electric control cabinet adopts a dust-proof and rainproof structure (protection level IP54) Fix with foundation screws. Install lighting fixtures inside the electric control cabinet. When the door of the cabinet is opened, the lighting fixtu…
-
2013.09.113848A brief introduction to cold pressed terminal blocks and terminal blocks
Commonly used cold pressing terminals include circular pre insulated terminals, forked pre insulated terminals, needle shaped pre insulated terminals, sheet shaped pre insulated terminals, circular bare ends, forked bare ends, tubular pre insulated terminals…
-
2013.08.233888Quality requirements for the installation of electrical cabinet control stations and electrical systems
The models and installation positions of various electrical components must meet the requirements of the drawings. All terminal boards, clamping rails, wiring ducts, wiring bases, sockets, and components must be securely positioned. The project c…
